Anqidi 6HP 2-Stroke Outboard Motor Fishing Boat Engine Tiller Shaft Water Cooling CDI System

Specifications

• Material: Aluminum Alloy
• Color: Black
• Surface Treatment: Spray Paint
• Assembly Required: No
• Number of Items: 1
• Engine: 2-stroke 6hp
• Displacement: 102cc
• Gear Ratio: 2.08(27:13)
• Number of Cylinder: 1
• Max. Output: 4.4KW
• Max. Speed: 4500-5500r/Min
• Noise: About 80DB
• Gear Positions: F-N-R
• Ignition System: CDI
• Cooling System: Water-cooling
• Control System: Tiller Control
• Starting System: Manual Start
• Gasoline: No.92 Lead-free Gasoline
• Fuel Type: Mixed Oil (50 Gasoline: 1 2-stroke Engine Oil)
• Trim And Tilt System: Manual Tilt
• Fuel Tank Capacity: 2.5L/0.66gal
• Fuel Consumption Rate: 2.5L/0.66gal/h
• Bore*Stroke: 5.5*4.3cm/2.16*1.7in
• Propeller Diameter: 18cm/7in
• Handle Length: 36cm/14.17in
• Adaptive Transom Plate Height: ≤44cm/17.32in
• Gross Weight: 24.15kg/53.24lbs
• Net Weight: 20.55kg/45.3lbs
• Product Size: 105*48*24cm/41.3*18.9*9.4in
• Package Size: 110*37*54cm/43.3*14.56*21.26in

Package Included

• 1x Outboard Motor
• 1x Flameout Rope
• 1x Tool Kit
• 1x Fuel Oil Mixing Bottle
• 1x Funnel
• 1x English Manual
• 1x English Operation Instructions
• All Accessories for Assembly

Notes

1.Please carefully read the manual and strictly follow the precautions to have a better experience.

2.Please measure the height of your boat before purchasing to ensure suitability for this product.

3.Please start the motor in the water. If the motor stops circulating water . please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.

4.Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours . during which the fuel ratio is 30L (7.93 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours . the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil.

5.Please note that the emergency shutdown rope should be inserted when the outboard motor is started . and the other end should be wrapped around your wrist or belt.

6.Please do not drive too fast during the running-in period. After the running-in period . the gear oil needs to be replaced . and the second replacement time is about 100 hours or 6 months later.

7.Please do not leave this product outside until the cooling water is completely used up. Otherwise . water will enter the cylinder through the exhaust port . leading to engine failure. After cruising in seawater or turbid water . please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place . and avoid direct exposure to sunlight.

8.If not in use for a long time . please thoroughly clean the gasoline in the fuel tank.

9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement . and make sure you do not mind before you order.