ANQIDI 18HP 2 Stroke Outboard Motor, 246CC Heavy Duty Fishing Boat Engine CDI Water Cooling System Tiller Control

About certification: We can only provide CE certification . there is no other certification can be provided . thanks for your understanding.

Must Read before using!

Two stroke 18 hp:

• - Firstly . Fill the gear oil (open gear box lid and fill it).
• - Secondly . Fill NO. 92 petrol . lightly press oil pump 6-10 times.
• - Thirdly . Fill engine oil don't exceed the head of the pattern.
• - Forthly . Turn the throttle to the start up and turn the accelerator gets up to 50%.
• - Then . Rapidly pull the starter line.
• - After the motor start . please turn the throttle to running state.
• - Then . it can be operated now.

Don't do the following will avoid cylinder Scoring:

• - 1.Start the motor in the water
• - 2.Use the motor when it stop cyling water
• - Even if you want test the motor . it should be done in the river!
• - When there is no water coming out from the motor .please stop using it immediately .then check the impeller of Water pump or check if the water outlet has been blocked.
• - Cylinder Scoring is a serious damage . which caused by improper use and will cost you a lot of money to repair the motor.
• - Several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached . and still after fixing it every time you go into any gear it gets unattached second . the starting rope doesn't retract all the way when you attend to start the engine.

Product parameter:

• - Displacement: 246CC
• - Gear ratio: 2.08(27:13)
• - Cylinder: 2
• - Max.Output(kw): 13.2
• - Max.speed(r/min): 4500-5500
• - Gear Positions: F-N-R
• - Packing size: 133x71x38.5cm/52.36x27.95x15.16in
• - Ignition System: CDI
• - Cooling System: Water-cooling
• - Control System: Tiller control
• - Starting System: Manual start
• - Control System: #92 lead-free gasoline
• - N.W./G.W.: 38.6kg(85.10lb)/49.5kg(109.13lb)
• - Bore x Stroke: 56x50mm/2.20x1.97in
• - Recommended Propeller range: 3 -9"1/4''x8"
• - Recommended Lubricant: 2 Stroke Lubricating oil
• - Mixing ratio: Fuel:oil=50:1
• - 1.The engine oil must be a two-stroke special engine oil. The two oils must be stirred evenly
• - 2.After use . the fuel in the carburetor must be completely discharged
• - Trim and tilt system: Manual Tilt
• - Overall LxWxH: 783x332x1053mm/30.83x13.07x41.46in
• - Standard fuel tank capacity: 24L

Package included:

• - 1*Instruction manual
• - 1*Flameout rope
• - 1*Oil pipe
• - 1*Sealing ring
• - 1*Tool kit
• - 1*Split pin
• - 1*Paper pad
• - 1*Spark plug
• - 1*Start rope
• - 1*Water pump impeller